Sliet Leet Syllabus 2023 ⋆ csestudy247

Hey Guys welcome to CSE Study247 in this article I am tell about Sliet Leet Syllabus 2023

Let’s Start

Table of Contents

SLIET Entrance Test

SLIET Entrance Test (SET) is an entrance examination conducted by Sant Longowal Institute of Engineering and Technology (SLIET), Punjab, India. The exam is conducted every year for admission to various undergraduate and postgraduate courses offered by the institute. The exam is usually held in the month of June or July.

The courses offered through SET include Bachelor of Engineering (B.E.), Master of Engineering (M.E.), Master of Science (M.Sc.), Master of Technology (M.Tech.), and Doctor of Philosophy (Ph.D.). The exam pattern varies according to the course applied for.

Overview of SLIET Entrance Test 2023

Name	Details
Name of the Exam	Sant Longowal Institute of Engineering and Technology Entrance Exam or SLIET SET
State	Punjab
Conducted By	Sant Longowal Institute of Science & Technology
Mode of Exam	Pen-and-Paper-Based Test
Course offered through the exam	Lateral entry BE and Integrated Certificate Diploma
Exam Duration	2 Hours and 30 Minutes
Number of Sections	English, General Knowledge, Mental Aptitude, Mathematics, Physics, Chemistry
Total Questions	150 Questions
Marking Scheme	One mark will be allotted for every correct answer. 25% negative marking will be done for wrong answers.
Official Website	slietexam.co.in
SLIET SET Email ID	[email protected], [email protected]
Helpline Number	01672-253108

Registration Date of SLIET Entrance Test 2023

Start Date :- 20 Mar,2023

Last Date :- 15 May,2023

Eligibility Criteria

For B.E. Courses: Candidates must have Appearing (5th Semester) /passed Diploma for any Branch Like

Computer Science
Civil Engineering
Mechanical Engineering
Electrical Engineering
Electronics Engineering
Chemical Engineering

For M.E./ M.Tech Courses: Candidates must have a B.E./ B.Tech degree or equivalent in the relevant field.

For M.Sc. Courses: Candidates must have a Bachelor’s degree or equivalent in the relevant field.

For Ph.D. Courses: Candidates must have a Master’s degree or equivalent in the relevant field.

SLIET Entrance Test (SET-III) for admission to B.E. (Lateral Entry) will consist of one paper of two and half hours duration. This
paper will have 150 objective type questions of 150 marks from

English
General Knowledge
Mental Aptitude
Mathematics
Physic
Chemistry
Basics of Engineering

GENERAL KNOWLEDGE, MENTAL APTITUDE & ENGLISH

(Marks: 20 (20 Questions)
Syllabus :
The paper will include questions covering the following topics:-

General Science
Current events ofNational and International importance
History of India
Indian Politics and Economy
Indian National Movement
General Mental ability
Idioms/Phrases
Usage of Tenses
Change the form of Narration
Fill in the blanks with suitable words.

MATHEMATICS

Marks: 20 (20 Questions)

Algebra	Solution of quadratic equations, relationship between their roots and coefficients. Equations reducible to quadratic equation. Symmetric Functions of roots. Formation of a quadratic equation with given roots. Arithmetic progression, Geometric progression and Arithmetico-Geometric series. Series of natural numbers (∑ n, ∑ n 2, ∑ n3). Mathematical induction.Permutations and Combinations. Binomial theorem for any index.
Trigonometry	Trigonometric Identities. Addition and Subtraction formulae. Transformation of product into sum or difference and vice-versa. T-ratios of multiple and sub-multiple angles. Heights and distances. Solution of Trigonometric Equations. Inverse trigonometric functions and their properties.
Coordinate Geometry	Rectangular Cartesian coordinates. Distance between two points. Section formulae. Locus of a point. Equation of a straight line in various forms. Angle between two given lines. Condition for two lines to be parallel or perpendicular. Distance of a point from a line. Line through point of intersection of two given lines. Concurrency of lines. Equation of a circle in various forms. Intersection of a circle with a straight line. Equations ofthe parabola, ellipse and hyperbola in the standard forms.
Three dimensional Geometry	Cartesian co-ordinate system, Distance formula, Section formula, Direction ratios and direction cosines, Equation of a plane, Equations of a Straight line.
Calculus	Function, its domain and range. Limit, continuity and differentiability of a function. Derivative of sum, difference, product and quotient of two functions. Derivative of algebraic, trigonometric, exponential, logarithmic, hyperbolic and Inverse trigonometric functions. Chain rule. Derivative of functions expressed in implicit and parametric forms. Maxima & Minima. Equation of tangent and normal. Integration as the inverse process of differentiation. Integration by parts, by substitution and by partial fractions. Integration of rational and irrational functions. Definite integral and its application for the determination of area (simple cases).
Differential Equations:	Order and degree of an ordinary differential equation, Ordinary differential equations of first order and first degree. Solution- variable-separable method, homogeneous differential equations and linear equation’s (Leibnitz’s).
Matrices and Determinants	Types of matrices, operations of matrices, elementary operations on matrices, determinants and their properties, Inverse of a matrix, solution of linear equations up to three variables by Cramer’s rule and by Matrix method. Statistics: A.M, Median, Mode, Range, S.d. and Coefficient of variation.

CHEMISTRY

Marks: 15(15 Questions)

Atoms, Molecules and Chemical Arithmetic	Symbols, formulae, oxidation, reduction, oxidation number, balancing of simple chemical equations, mole concept, empirical formulae and molecular formulae
Chemical families – Periodic Properties	Mendeleev’s and Modern periodic tables, classification of elements into s, p, d and f blocks, periodic properties(ionization potential, electron affinity, atomic and ionic radii, oxidation states).
Atomic Structure, Bonding and Molecular Structure	Bohr’s theory, brief description of hydrogen spectrum, the wave nature of matter, de-Broglie’s theory, Uncertainty principle, Quantum numbers, Pauli’s exclusion principle, Hund’s rule of maximum multiplicity, shapes of orbitals, electronic configuration of atoms upto atomic no. 30. Types of bonding (ionic, covalent and coordinate covalent), Lewis structure, VSEPR theory, Molecular orbital theory and molecular shapes, hybridization (sp, sp2 and sp3) and molecularstructure, hydrogen bond, metallic bond,Vander Waalsforces.

PHYSICS

Marks: 15 (15 Questions)

Description of Motion	Motion in a straight line, uniform motion, speed and velocity, equation of motion in a straight line, position time graph, instantaneous velocity and acceleration, motion in two dimensions, projectile motion, uniform circular motion, torque, angular momentum, conservation of angular momentum, centripetal and centrifugal forces, centre for mass, motion of centre of mass and momentum conservation.
Moment of Inertia	Moment of Inertia (M.I.) of rigid body, radius of gyration, theorem of parallel and perpendicular axes, M.I. of a straight rod, circular ring, circular disc, relation between torque and M.I., kinetic energy, motion of point mass tied to the string to the wound on a cylinder, motion of cylinder rolling without slipping on an inclined plane.
Kinetic Theory of Gasses	Boyle’s and Charles’s laws, gas equation, gas constant, pressure exerted by gas, kinetic energy of molecules, kinetic interpretation of temperature, derivation of gas laws from kinetic theory of gases.
Electromagnetic Waves, Atomic and Nuclear Physics	Production and properties of e.m.waves, e.m. spectrum, nature and velocity of e.m. waves, propagation of radio waves in earth’s atmosphere, photoelectric effect, laws of photoelectric effect, production of x-rays, soft and hard x-rays, uses of x-rays, Radio activity laws, half life and average life for radioactive materials, nuclear fission and fusion.

Basics of Engineering

GROUP – A (Electrical, Electronics and Computer Group

Marks : 80	(80 Questions)
Operating System	Introduction to various operating systems, single user, multiuser, batch processing, time sharing, real time, multiprogramming and multiprocessing systems, distributed computing, resources management, memory management;
System Software:	Introduction, system software, application software, compilers, assemblers, loaders, linkers;
Application Development	Algorithms and flowcharts, program writing, debugging and execution, compilation, interpretation, programming using C language, Object Oriented Programming concepts;
Information Technology (IT)	Internet and its applications, web browser, E-mail; e-marketing & e-payment
Data management and organization	Introduction to databases, architecture and structure of DBMS, data models;
Introduction to data structure	arrays, linked list, stacks and queues;
Computer Networks	Applications, introduction to OSI and TCP/IP, Networking topologies/technologies; Latest Technologies: Latest processor and memory configurations and related technologies.
Software Engineering:	Software Development Life Cycle, Software metrics, Coding and Testing;
Computer System Architecture	Number system, Boolean Algebra, K-map, Instruction formats, Addressing modes, I/O interfacing, Control unit organization, Pipelining, Cache and main memory, Modes of data transfer.
Cloud Computing	Introduction to cloud computing, edge computing, fog computing and IOT.
Electronic Devices	Conductors, semiconductors, insulators, Extrinsic & Intrinsic semiconductors. PN Junction Diode – its V-I characteristics, Rectifiers, filters. BJT – various transistor configurations, their input/output characteristics. FET, MOSFET their construction & characteristics.
Communication	Need & types of modulation (AM, FM, PM). Radio Receivers – TRF & super-heterodyne. Pulse modulation PAM,PCM,, PWM, PPM.
Logic gates –	Definition, symbols & truth table of NOR, OR, AND, NAND, EX-OR gates, various Flip Flops (SR, JK, T, D), Registers & Counters.
Operational Amplifier	Introduction, IC 741 pin configuration, inverting & Non inverting amplifiers, Op Amp as an inverter, scale changer, adder, sub-tractor, differentiator, integrator.
Electric Circuits	Voltage, current, resistance, power and energy, Ohm law, series and parallel circuits, Network theorems ( Thevenins, superposition, Norton, Maximum power transfer theorem, reciprocity and Tellegen’s theorems), Alternating current and voltage, RL, RC and RLC circuits, RLC resonant circuits, power factor and power measurement
Electromagnetic & Magnetic circuits	Overview of electrical and magnetic circuit, Analogy between electrical and magnetic circuits, Principle of operation and working of AC & DC machines and Transformers.
Measurement and Instrumentation	Errors in measurement system, Galvanometer, PMMC and Moving iron instruments, DC potentiometers, Multimeter, LED/LCD/Segment Displays, CRO, Wheatstone bridge, Maxwell’s Bridge, De-Sauty’s Bridge, Owen’s Bridge, Kelvin’s Double Bridge, Hay’s Bridge
Sensors and Signal Conditioning	: Basic components of instrumentation system, sensors and transducers, resistive, capacitive and inductive and Piezoelectric transducers, A/D and D/A converters, filtering and impedance matching, Telemetry
Control Engineering	Basic elements of feedback control system, time domain response of first and second order system, time and frequency domain specifications, concept of stability

GROUP – B (Mechanical Group)

Marks : 80	(80 Questions)
Thermal Engineering	Basic concepts, thermodynamic properties: intrinsic and extrinsic, open, closed and isolated systems, heat and work, specific heat, thermal and thermodynamic equilibrium, Zeroth law and first law of thermodynamics, internal energy, entropy, enthalpy. Clausius and Kelvin-Plank statement of second law, different thermodynamic processes like isobaric, isochoric, isothermal, and reversible adiabatic, C.I. engine, S.I. engine, Otto Cycle, Diesel Cycle, Carnot Cycle, Steam Formation: Dry, Wet Steam, Dryness Fraction
Applied Mechanics, Strength of Material and Machine Design	Concept of mechanics and applied mechanics, laws of forces, moments, friction and laws of motion. Stress & strain, concept of load, tensile, compressive, shear stress, torsion, Bending Moments and strains. Columns, Springs, Beams, stress concentration, types of loading, theories of failure, factor of safety, endurance limit, efficiency of riveted and welded joints, keys and its types, stress in shafts, design of shafts (solid and hollow)
Fluid Mechanics	Concept of fluid, fluid mechanics and hydraulics, properties of fluid (viscosity, specific weight, specific volume, specific gravity) with their units. Pascal’s law, concept of atmospheric pressure, gauge pressure, absolute pressure, vacuum and differential pressure, Buoyancy, Centre of Buoyancy, Metacentre, Metacentre Height and Application.
Manufacturing Engineering & Management	Introduction and classification of engineering materials, thermal, chemical, electrical and mechanical properties of commonly used engineering materials. Purpose of heat treatment, various heat treatment processes like cyaniding, nitriding, hardening, case hardening, annealing, normalizing, tempering, and their applications. Arc and gas welding processes, pattern materials and pattern allowances used in pattern making, cores, basic foundry processes and powder metallurgy. Different machining operations, principles of operations, cutting tools and machine tools used to carry out turning, milling, drilling, shaping & planning operations. Quality control, control charts, acceptance sampling, TQM. Plant location, layout and line balancing. Types of plant layouts. Inventory control, Inventory classification, and EOQ and ABC analysis.
Introduction to data structure	arrays, linked list, stacks and queues;
Computer Networks	Applications, introduction to OSI and TCP/IP, Networking topologies/technologies; Latest Technologies: Latest processor and memory configurations and related technologies.
Electronic Devices	Conductors, semiconductors, insulators, Extrinsic & Intrinsic semiconductors. PN Junction Diode – its V-I characteristics, Rectifiers, filters. BJT – various transistor configurations, their input/output characteristics. FET, MOSFET their construction & characteristics.
Electromagnetic & Magnetic circuits	Overview of electrical and magnetic circuit, Analogy between electrical and magnetic circuits, Principle of operation and working of AC & DC machines and Transformers.
Measurement and Instrumentation	Errors in measurement system, Galvanometer, PMMC and Moving iron instruments, DC potentiometers, Multimeter, LED/LCD/Segment Displays, CRO, Wheatstone bridge, Maxwell’s Bridge, De-Sauty’s Bridge, Owen’s Bridge, Kelvin’s Double Bridge, Hay’s Bridge
Control Engineering	Basic elements of feedback control system, time domain response of first and second order system, time and frequency domain specifications, concept of stability

GROUP – C (Chemical and Food Group

Marks : 80	(80 Questions)
Chemical Engineering Thermodynamics	Laws of Thermodynamics, Thermodynamic properties ,General Thermodynamic relationship, Application for open/closed systems and reversible/irreversible processes, Raoult’s Law, Chemical Reaction Equilibria.
Chemical Reaction Engineering:	Molecularity and order of reaction, reaction Kinetics, different type of ideal reactors and their performance equations,
Heat and mass Transfer	Different modes of heat transfer with governing relationships, Fourier’s law, Steady state heat transfer through plain and composite slab, cylindrical and spherical surfaces, Natural and forced convection, Radiation heat transfer, Heat transfer equipment’s and their industrial applications, Fick’s law of diffusion, Mass transfer operations and their applications, Critical moisture content, absorption, equipment for separation and industrial application.
Unit Operations:	Calculation of energy required in grinding by Ritinger’s law and bond’s law, Bernoulli’s theorem and different regimes, elementary knowledge of pumps and fluid behavior, Mixing index, Rate of mixing, agitation, constant rate filtration, consent pressure filtration, filter cake compressibility, Centrifuge equipment like cream separator and clarifiers used in dairy industry, Crystallization
Process Instrumentation	Instruments for temperature, pressure, liquid level, flow and pH measurement.
Environmental Studies	Human population growth and environmental challenge, deforestation, desertification, global warming and climate change, role of individual in environmental conservation, Equitable use of resources, overutilization and wasteful utilization of natural resources, conservation of wildlife and biodiversity, Vehicular pollution, industrial pollution, municipal wastes, noise pollution, introductory ideas of water and air pollution control, Nuclear hazards, water act, air act, forest conservation act
Food Chemistry and Microbiology	Classification, Physical and chemical properties of carbohydrates, proteins, lipids, type of pigments, vitamins and minerals, morphology, methods of reproduction and type of bacteria and fungi, microbiology of various food products
Electromagnetic & Magnetic circuits	Overview of electrical and magnetic circuit, Analogy between electrical and magnetic circuits, Principle of operation and working of AC & DC machines and Transformers.
Food Process Technology	Milling of cereals and pulses, oil extraction methods, standardization, homogenization and pasteurization of liquid milk, meat and poultry processing, production of alcoholic and non-alcoholic beverages, technology of manufacturing of fruits and vegetables product, different preservation techniques in food
Food Analysis and Quality Control:	Quality attributes, food adulteration and its detection, physico -chemical and mechanical properties of food, sensory evaluation, HACCP, food safety and standards Act.